integrated transfer machine is a small precision CNC lathe with high precision, high rigidity, high efficiency and low price. It has various processing functions, good accuracy and stability. It is not only good at processing non-ferrous metals, but also excellent in the processing of various alloy steel and stainless steel parts. Designed for small precision complex parts processing, its economy is not questionable. integrated transfer machine is more suitable for complex parts processing and production than ordinary machine tools, so in order to maintain the accuracy of the machine tool, we must pay close attention to the environmental conditions of the machine tool installation.

1, approach, should be installed away from the source of the place, avoid direct sunlight, no heat radiation, no moisture. If there is a source near the installation site of the equipment, it is necessary to set up a seismic trench around the equipment. If the anti-vibration groove is not set, it will directly affect the processing accuracy and stability, affect the poor contact of electronic components, and cause failure for a long time.

2, CNC machine tools are usually installed in the machining workshop, machining workshop mechanical equipment is a lot, it will inevitably lead to large fluctuations in the power grid, so must strictly control the voltage and current of the power supply in the installation position for control. It is necessary to control the voltage and current of the power supply within the allowable range of the device and keep the voltage and current of the power supply stable. Otherwise, the normal operation of the device is directly affected.

3, the general ambient temperature and humidity should be below 30, which directly affects the normal operation of the machine tool, and the power distribution box of the machine tool has exhaust fans and chiller. Make sure the electronics and CPU are at a constant temperature.

If the temperature and humidity are too high, the life of the control system components will be shortened, and failures will increase for no reason. The increase in humidity will increase the dust on the integrated circuit board, which is the direct cause of poor contact and short circuit.

4, machine tool shop parameter Settings When users use, machine tool shop parameter Settings can not be changed at will. This is because these factory parameter Settings directly affect the dynamic characteristics of each component of the equipment, and can only change the value of the gap compensation parameter. Set this parameter based on the actual situation. If you want to change the factory setting parameters, you must notify the manufacturer and follow the instructions of the manufacturer's technician to change the factory setting parameters.

integrated transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html