With the development of my country from high speed to high quality, more and more attention is paid to technology and quality, Nova Welding must also follow the trend of the times, and constantly innovate and develop resistance welding machines (including resistance butt welding machine 450mm butt fusion welding machine, resistance spot welding machine Machine, resistance projection welding machine, resistance seam welding machine, resistance brazing machine) products, constantly updated. The semi-automatic copper bar 450mm butt fusion welding machine is also upgraded under this background.

What is the difference between the upgraded use of microcomputer and semiconductor control and the original traditional model?

1. The traditional model uses a contactor as a switch, which has a life limit, generally the upper limit is 5000 times, while the new model has no upper limit, and the service life is greatly increased.

2. The traditional model uses 8 gears to adjust the welding current, and sometimes there is an embarrassing situation where the current is too big or too small. The new 99 gears can be adjusted to accurately set the two important parameters of welding current and time.

3. The traditional model will have sparks splashing, which makes welders afraid. The new model suppresses sparks by 90%, which is safe and secure.

4. The traditional model uses the rotating gear, and the handle will age after a long time of use. The new model uses the inner key of the controller, which is not easy to be damaged.

5. The traditional small faults should be checked comprehensively, while the new models will self-diagnose, protect themselves and actively alarm.

450mm butt fusion welding machine https://www.dowelding.com/Butt-Fusion-Machines