This is an article to guide the safe operation of the cutting machine. Deguang, a professional cutting machine manufacturer, listed the four-point cutting machine operation rules and the ten-point cutting machine use precautions to help you use the cutting machine better. Interested partners may wish to take a few minutes to visit with Deguang.

Cutting machine safety operation rules

1. Preparation before Cutting machine

(1) Before using the Cutting machine, the performance of the equipment must be carefully checked to ensure the integrity of each component.

(2) Check the power switch of the cutting machine, the tightness of the saw blade, the saw blade guard, or the safety baffle in detail. The operating table must be stable, and there should be enough lighting when working at night.

(3) Before using the Cutting machine, first turn on the main switch, and try to turn it for a few laps with no load. The cutting machine is not allowed to start until it is confirmed that it is safe and correct.

(4) Before the operation, it is necessary to check whether the power supply of the cutting machine is consistent with the conventional rated 220VA voltage on the power tool, so as to avoid a wrong connection to the 380VA power supply.

2. Precautions for the use of the Cutting Machine

(1) Be sure to pay full attention to cutting machine work, not only to keep a clear head but also to operate power tools rationally. It is strictly forbidden to operate the Cutting machine after exhaustion, drinking, or taking stimulants or drugs.

(2) The power line of the Cutting machine must be safe and reliable. It is strictly forbidden to pull it without permission. Be careful when placing the power line of the Cutting machine, and do not cut it off. The performance of the equipment must be carefully checked before use to ensure that all parts of the cutting machine are in good condition.

(3) Wear suitable cutting machine overalls, do not wear loose overalls, do not wear jewelry or have long hair, and are strictly prohibited from wearing gloves and unbuttoned cuffs to operate.

(4) The workpiece of the cutting machine must be firmly clamped, and it is strictly forbidden to start cutting if the workpiece is not clamped tightly.

(5) It is strictly forbidden to grind the burrs of the workpiece on the grinding wheel plane of the Cutting machine to prevent the grinding wheel from breaking.

(6) When cutting, the operator of the Cutting machine must deviate from the front of the grinding wheel and wear protective glasses.

(7) It is strictly forbidden to use the broken cutting machine grinding wheel. When cutting, you should prevent sparks from splashing around, and keep away from inflammable and explosive materials.

(8) When clamping the workpiece, the clamping should be stable and firm, and the protective cover of the cutting machine must be installed correctly. After clamping, the machine should be turned on and run for inspection, and there should be no jitter or abnormal noise.

(9) When the cutting machine is replaced with a new cutting blade or grinding wheel in the middle, do not apply too much force to the lock nut to prevent the saw blade or grinding wheel from cracking.

(10) The handle of the Cutting machine must be held firmly and cut vertically with even force, and the fixed end must be firm and reliable.

The above is all about the cutting machine that Deguang brought to you today. I hope the above content can help you master the operating points of the cutting machine and avoid mistakes. For more information about the cutting machine, please refer to the following:

What is a cutting machine? What factors need to be considered when buying?

Do you know what are the commonly used Cutting machines?