With the development of the industry, the slitting machine has been used in all walks of life, so the accuracy of cutting is also highly concern. Today, the manufacturer of the slitting machine, Deguang, will take you understand the factors that affect the accuracy of the width of the slitting machine.

1. Slitting machine tool lateral swing

During the operation of the slitting machine equipment, if there is a problem with the lateral swing of the tool, it will lead to poor sizes, such as the lateral swing of the tool and the size of the outer diameter of the tool. Because the lateral rocking value of the tool cannot be zero. Usually, the lateral sway value of its load is about 0.03-0.05mm. The reason is the accuracy error of knife thickness, inner diameter, distance sleeve width, etc., and the warpage caused by lateral stress when the thick plate is sheared.

2. The transverse warping of the steel plate of the slitting machine

During the production of the slitting machine equipment, due to the problem of lateral warpage of the steel plate, the width dimension is not good. This is because the measurement of the product cut under the condition of lateral warpage is larger than the setting value of the knife.

3. The error between the parts of the slitting machine

Because with the production and operation of the slitting machine equipment, there are certain cooperative errors in the distance sleeves, tools, etc. Under normal circumstances, the thickness accuracy of distance sleeves, tools, etc. is 0.005. When the number of pieces is large, the cumulative error will become larger. This is because of the poor setting of the public service. It should be known that the width of the product cut by the slitting machine is slightly lower than the side size of the product with the knife. Therefore, it is necessary to predict the degree of this difference in advance. Refer to when the size of the distance sleeve is determined when the knife is equipped on the product side. Also, take into account the cutting method chosen. In comparison, if the slitting machine equipment adopts straight-pull shearing, the tension of the steel coil will increase, the lateral warpage will disappear, and the size will be worse.

Not only the overall stability of the equipment is guaranteed, but the slitting machine can maintain smooth operation during the production process. In addition, the slitting machine is equipped with a pressure balance device to balance the pressure on both sides of the pressure surface. In addition, the finished product winding tension control system of the slitting machine equipment has also been improved, which can then ensure the tightness of the finished product winding.

In the process of our daily use of the slitting machine, the lateral swing of the tool, the lateral warpage of the steel plate, and the error between the various parts of the slitting machine will affect the accuracy of the width dimension of the slitting machine. This problem can be well improved by the above method. I hope this article is helpful to you. For more information about slitting machines, please click the following wonderful articles:

Precautions for daily maintenance of slitting machine

Slitting machine operation- preparation before operation (1)