central dust collecting system is composed of air inlet pipe, air exhaust pipe, box, ash bucket, ash cleaning device, diversion device, air distribution plate, filter cylinder and electronic control device, which is similar to the dust collecting structure of air box pulse bag. The arrangement of central dust collecting system is very important. It can be arranged vertically on the box flower...
With the accumulation of dust on the surface of the filter material, the rate and resistance of the function of cyclone separator are increased accordingly. When the pressure difference on both sides of the filter material is very large, some of the fine dust particles have been attached to the filter material will be squeezed in the past. The rate of function of cyclone separator decreases. In...
suspended suction arm was a suction suction device well designed for the top and bottom of cement storehouse, belt conveying and local dust source. It is mainly composed of the box body (including bag chamber, clean air chamber, porous plate, filter bag, bag cage frame and access door. The box body design is not afraid of pressure of 5000pa.) , injection system (including air bag, injection...
The mobile fume extraction unit is mostly used to filter the gas, which is called the air filter cartridge (hereinafter referred to as the filter cartridge). The filter cartridge belongs to the surface filter element, which uses the tiny air-permeable tissue formed on the surface of the filter material to block the particulate matter in the gas.
The automatic cleaning method commonly used in...
The use of the external suction arm is to check whether the filter bag and the filter element are installed, check the rotation of the fan, and for the belt drive, check whether the belt falls off, etc. After each use, clean up the dust in the filter bag as much as possible to prevent moisture adhesion, which is unfavorable for filtration and easy to damage the filter bag. Before use, check...
The use of the external suction arm is to check whether the filter bag and the filter element are installed, check the rotation of the fan, and for the belt drive, check whether the belt falls off, etc. After each use, clean up the dust in the filter bag as much as possible to prevent moisture adhesion, which is unfavorable for filtration and easy to damage the filter bag. Before use, check...
At this stage, in the industrial production industry, dust is caused. If the dust is not removed immediately, it will not only cause harm to the physical and mental health of the workers, but also reduce the company's productivity and detriment to the company's development. With the rapid development trend of high and new technology level, in the whole process of industrial production, the...
English
Arabic
French
Spanish
Portuguese
Deutsch
Turkish
Italiano
Russian
Romaian
Portuguese (Brazil)
Greek
